Random-Access Memory (RAM) is a data storage element used in many devices such as computers, mobile phones etc. In this article, you will know about the types of RAM and its uses. Random-Access Memory (RAM) is a component used in devices for the storage purposes. The data that is stored in RAM is read in terms of bursts. Depending on the way the data is maintained, RAM chips are classified. Basically, RAM is classified into two main types. They are:
• Static RAM or SRAM
• Dynamic RAM or DRAM
Static Random-Access Memory
SRAM uses bitable flip-flops, to store the data in bits. Once the data is written in SRAM, it is stored, and it doesn't have to be refreshed as often as other types of RAM. There are three modes in which a cell, which actually stores data in SRAM, operates. They are Standby, Reading and Writing. Unlike DRAM, SRAM doesn't consume more power.
Types of Static Random-Access Memory
Depending on Data Storage
• Non-volatile SRAM: Data is stored, even when the power is off, so that critical information is secured.
• Asynchronous SRAM: The data can be stored in the range of 4Kb to 64 Mb. Fast access time is a main characteristic of Asynchronous SRAM, and so it used as a main memory component in many electronic devices and embedded systems.
Depending on Transistor
• Bipolar Junction Transistor: It is used in Transistor-Transistor Logic (TTL) and Emitter-Coupled Logic (ECL) devices. It consumes more power, but it works very fast.
• Metal Oxide Semiconductor Field Effect Transistor (MOSFET): It is used in Complementary metal-oxide-semiconductor (CMOS) technology based applications.
Depending on Features
• Quad Data Rate SRAM: In one complete clock cycle, two words of data is transferred. Separate I/O bus (network that connects all the devices and chips in a computer) is used to read and write data.
• DDR SRAM: Common I/O bus is used for data transfer and a single clock is used to control the input and output of data.
Depending on Flip-Flop
• Binary SRAM: It comprises mask transistor and latch.
• Ternary SRAM: It is designed using 8 transistors or 14 transistors.
Uses of Static Random-Access Memory
• Computers
• Microprocessors
• Digital Signal Processing (DSP) circuits
• LCD screens and printers
• Hard disk and router buffers
• Digital cameras
• Synthesizers
• Cell phones
Dynamic Random Access Memory
Types of Dynamic Random-Access Memory
SDRAM
The change in the input is perceived and quickly responded by SDRAM1. It is a synchronous interface, which is synchronized with the computer's system bus and its operations is enabled by an input clock signal.
DDR SDRAM
DDR2 SDRAM is an Integrated Circuit (IC) chip, which stores data, in a computer. The clock signal used in DDR SDRAM is more efficient than the one used in SDRAM, and so the data transfer is made faster. DDR SDRAM interface uses what is referred as double pumping process, which means that the data is transferred during both the upward and downward edges of the clock signal. The data transfer rate of DDR SDRAM is 1,600 megabytes per second. It is used in computers and mobile phones.
DDR2 SDRAM
DDR23 SDRAM is the successor of DDR SDRAM. The power consumption of DDR2 SDRAM is less as compared to its predecessor and the speed of the data bus is high. The one difference between DDR2 SDRAM and DDR SDRAM is, the clock speed of former is half that of latter chip. The maximum data transfer rate of DDR2 SDRAM is 3,200 megabytes per second.
DDR3 SDRAM
Compared to its predecessor, DDR34 SDRAM gives high bandwidth, high data transfer rate etc. The data transfer rate of this RAM is 6,400 megabytes per second, which is twice that of DDR2 SDRAM. The power consumption of DDR3 SDRAM is 30% lower than DDR2 SDRAM.
DDR4 SDRAM
It is the next generation high bandwidth interface, which is being developed and is expected to get released in 2012. Some of the expected benefits of DDR45 SDRAM is, high data transfer rate, low input voltage, high range of clock frequencies.
DRDRAM
DRDRAM6 or RDRAM is a type of SDRAM which known for its high latency, heat output, complexity, and low performance in exchange for its high price. It is used in video game controls and in video cards.
PSRAM
PSRAM7 offers the combined benefits of DRAM (high density) and true SRAM (ease of use). It has built-in refresh and address-control circuitry which is very similar to that of SRAM and is used in many embedded systems such as Apple products.
RLDRAM
This type of RAM is mainly used in networking and caching applications. Applications involving high rate of read/write operations benefits from the use of this chip. RLDRAM8 provides random access with high bandwidth.
EDO DRAM
EDO9 DRAM can also be called Hyper Page Mode enabled DRAM, provided improved performance by allowing the consecutive operations to overlap. Because of this facility, a new access cycle can be started even when, the output data of the previous cycle is active.
SGRAM
SGRAM10 is used in graphic adaptors and it can open two memory pages at a time. This chip also offers bit masking and block writing. SGRAM is designed for high performance acceleration purposes which is especially used in video cards.
FPM DRAM
With FPM DRAM11 the reading and writing of data is not delayed due to precharge and accessing the row of the DRAM. This increases the performance of the device.
Long Forms of the Abbreviations
1. SDRAM - Synchronous Dynamic Random-Access Memory
2. DDR SDRAM - Double Data Rate Synchronous Dynamic Random-Access-Memory
3. DDR2 SDRAM - Double Data Rate Type Two Synchronous Dynamic Random-Access Memory
4. DDR3 SDRAM - Double Data Rate Type Three Synchronous Dynamic Random-Access Memory
5. DDR4 SDRAM - Double Data Rate Type Four Synchronous Dynamic Random-Access Memory
6. DRDRAM - Direct Ram bus Dynamic Random-Access Memory
7. PSRAM - Pseudo static Random-Access Memory
8. RLDRAM - Reduced-Latency Dynamic Random-Access Memory
9. EDO DRAM - Extended Data Out Dynamic Random-Access Memory
10. SGRAM - Synchronous Graphics Random-Access Memory
11. FPM DRAM - Fast Page Mode Dynamic Random-Access Memory
Some portion of Random-Access Memory can be partitioned and is used as hard disk drives to store data. It stores data temporarily and it is used mainly in computer devices. The technology of carbon annotates is to be combined with RAM Technology to increase performance. This allows for faster data access, although the data is stored temporarily and it is used mainly in computer devices. Since 1951, when the first RAM was created and marketed, the technology is advancing leaps and bounds. The scientists are, now, working on how to combine carbon annotates with the RAM Technology to increase performance.
![[Valid RSS feed]](http://www.articlelog.com/images/icon_Rss.png "XML Feed For RSS"){kind=icon}
Category Rss Feed
Print This Article
Add To Favorites